BLACK

have at it….

As we all anticipate what should be an exciting match up between two explosive offenses in Auburn and Oregon for the National Championship, we may be able to glean some useful lessons from both these teams. Both represent fast-paced no-huddle offenses that are borrowing on basic concepts and adapting them as the lastest offensive innovation. Ironic or fittingly, I suppose, that we covered both teams offenses earlier in the Fall (Oregon / Auburn), but what stands out to most people about each is not their plays or scheme so much, as their method of operation...................fast. In this post, we will provide some insight into how one of these teams facilitates this tempo via sideline signal boards.

While it has garnered quite a bit of attention (and favor) with the BooYah Sports Network by featuring their self-heralded icons during Oregon games, Auburn's similar practice has been rather subdued. Both essentially share the system of communication, along with other offenses (Oklahoma State).

It may appear as complex chaos, the methodology is quite simple. You have a base offense and concepts that you run, all you are doing is eliminating the unnecessary huddle and parsing the relevant pieces of information needed on a given play. The no-huddle concept has been around for a while, but recently it has undergone more efficient tweaking, accentuating the irrelevance of the huddle. If you've ever spent anytime coaching offense, you'll know just how tedious and frustrating it can be dicking around "coaching" the huddle procedure ('YOU go here...you go there....no, no, no...you're supposed to face that way!").

To better explain this process, I've included examples of how this information would be coded and signaled to flesh out how it actually works. Lets explore what needs to be delivered to the players....

Formation
Motion
Play direction
Play Type

This is common information usually shared in the huddle, before anything is presented to the defense. What the no-huddle is doing is presenting a formation, allowing the defense to match it, then call an offensive play based on this information and/or change it (if necessary). All this can be accomplished outside the confines gathering the players together; just line up, get the play, and execute it.

How information is being communicated (the huddle is a waste of resources)

As the offense nears the spot, they will assume the same formation as the last play (though nothing really changes for the offensive line, quarterback, and fullback on most every play). The formation will be signaled (usually by a sideline player) as soon as the previous play ends along with any pre-snap movement until that formation is achieved. Next, the play type will be given to the players. The quarterback will begin the cadence, repeating the playside/series code, and snap the ball. Once the play ends, the next begins and the process repeats.

This necessitates an offense to develop its own language, with multiple terms (and signals) to deliver the same information, so the code cannot be easily ‘cracked’. This is achieved by concept association and by allowing the position units to devise the terms they want to use (ownership of association).

Sideline Communication
The sideline usually features up to four different signalers consisting quarterbacks, receivers, graduate assistants, assistant coaches, and coordinators. These players will be signaling something every down, though not every signaler will be ‘live’ (will be signaling bogus dummy calls). The common method is broken down as follows;

Play Caller: coordinator / coordinator assistant
Signaler: position coach (runs, play action, screens)
Color: player (black or blue = right / white or gold = left / red = play change/check)
Signal Board: GA (passes)

All these individuals will present their signals to the on-field players until the ball is snapped to ensure that no player did not receive the information. So once a play ends, the 'next play' begins with the entire offense setting up on the spot of the ball, looking to their sideline for new information.

The real key to the team of signalers is the Color designator. Colors will determine if the signaler is hot (or the board is hot) as well as reinforce what the playside will be.

Black, White, Green, Pink, Brown – Signaler is Hot
Blue, Gold, Red – Board is Hot

So by this example, after a formation is given and the sideline player signaling “Black” (right is playside / signaler is hot) the players on the field will look to the signaler for the play. If the color signaler is delivering “Blue”, they can understand that the playside is right and the board is hot (i.e. pass routes) and disregard the signaler.

To better explain this process, I've included examples of how this information would be coded and signaled to flesh out how it actually works. Let’s explore what needs to be delivered to the players....

As you can see by the charts above, the no-huddle concept of signaling can deliver this information quickly through association and will generally only affect the 5 specialists on offense.

Next, the play type (run, play action, screen, or pass) can be delivered. The key is to group the play type by genus or series.

“If the reference is X, I will know that the play is going to be ‘this type’, now all I need to know is which one”

In our examples we can classify the play types as;
Runs are represented by NFL teams (or mascot)
Passes are represented by College teams (or mascot)
Play action passes will be represented by the run action signal with a (color) tag
Screens are based off locations (city or state)

We saw this earlier (and it is quite common) during the write-up on Louisiana Tech’s first few practices last spring as well as Bo Pelini’s base defense concepts, where commonly used categories represent different types of plays.

Take these examples for instance;
I=draws the association of “I for IZ” that is commonly tied to the NFL team, Indianapolis Colts, so any horse reference would be able to convey a zone run.

P=draws the association of “P for Power” (i.e. NFL team with a ‘P’ is the Patriots), so all you would have to do is deliver an iconic symbol of what people would associate a ‘patriot’ with.

During this entire process, the quarterback can eyeball the sideline while ‘translating’ audibly to the line and backs…. “Blue, Blue….Cowboy! Cowboy!” (right counter) without the defense really having any idea of what is going on. Alternatively, the very next play could be called “Black, Blue….Dallas! Dallas!”, and still be running the same play.

With passing plays, it is the same process, but this is where the boards come in. If the board is 'hot', the bogus play type will be called out and let the offensive line know it is not run-action, so they will need to listen for the protection. The fullback will then call out a play-specific protection on every down (much like the TFS system will have the back make a 'roger' / 'louie' call each play).

When the board is ‘hot’ the quadrants will represent primary and secondary receiver routes based on the route tree used. So, you could have your passing concepts represented by both associations (NCAA teams/mascots deliver a passing concept) as well as number representations (“20” / “97”). See below for a standard chart for passing concepts and marry them up with the included passing tree.

If you are calling a smash concept, you could just call "Razorback" (Arkansas) or the "20" (or "90"). The "2" in this call would represent the initial read side (right) and the "0" indicates primary receiver running the hitch.

Once you’ve taught the power, you’ve also taught the counter (to the playside). All the rules remain the same; PST works a B-gap track, PSG works an A-gap track, Center works backside, and BST hinges.

The only thing that changes with counter is the backside guard and H-back. The guard will change his pulling footwork to accommodate the trap technique on the end. He will exit on a 45 degree angle, rather than the 90 degree open-hip technique used on power option. Since the guard is kicking out the end, the H-back will exchange roles (with power) and seal the first backer inside the box.

The same principles used with power apply with counter. If the DE wrong-arms the kickout, the guard can log, leaving the H-back to loop outside and bounce the run.

After a heavy diet of power (overload of numbers at the point of attack), the homerun threat of counter action can stretch defenses to a breaking point. To help with this horizontal stretch, the slot (#2) running orbit motion will adhere to a simple set of rules. If the ball carrier is aligned in split backs (away from where the orbit motion is coming from), the slot (in motion) will continue on an (power) reverse track to the counter action. If the ball carrier is stacked (pistol), the motion man will reverse out and run an option course with the quarterback. This simple rule helps stress defenses who will game plan against counter/power, by spinning a safety down with the motion. By introducing the reverse path, the playside safety is widened, creating a larger seam for the ball carrier to run through.

Malzahn’s offense is premised on a 2-back run and play-action team that will keep constant pressure on a defense and defensive coaches by;

1. Running the offense at a 2 minute pace the entire game (physically and mentally wear them down)
2. Balanced attack
3. Heavy misdirection in the run and passing game
4. Stretch the field vertically and horizontally
5. Throw the book at defenses with specials, fire alarms, and various personnel packages. Plan to go into each game with 7-8 trick plays
6. Present the option in 3 different ways (zone read, speed option, power g option)

After covering the zone-read with bubble last year and with the Cam Newton destroying defensive fronts this season, it may be time to cover Auburn's gap run schemes (Power, Counter, Hand Sweep). What is interesting about this "spread" is how much nothing has really changed over the years. This series is nothing more than Wing-T from the gun, and you'll find more and more spread teams complimenting their zone runs with these concepts (La Tech, for one).

Gus Malzahn gained notoriety as a high school coach in Arkansas throwing the ball and attacking through tempo and extreme spread sets (see ninja). While joining forces with Rich Rodriguez protege, Herb Hand, the appreciation of the 2-back power run game was realized and perfected. In this post, we'll take a look at how Auburn's inside/outside zone is complimented by gap blocking via "Power", in its many forms.

POWER G





The H-back looks to make his first step to the midline of the defensive end (or EMOL), who he will kick/dig out of the C gap. He obviously wants to leverage this player quickly by striking the chest and pin the inside shoulder of the defender. This player doesn’t always align in the backfield. Malzahn will often bring a slot receiver or tight end into the formation late with motion.

The playside tackle will step down hard inside and follow a B-gap track. He is looking to work his track to the 2nd inside linebacker in the box. If it is an (base) odd front, the tackle will work toward the backside inside linebacker. If it is a stacked front, he will work to the MLB. If confronted with a 3 technique playside (defensive linemen in B gap), the tackle will look to make this DT an A gap player, washing him into the playside guard’s track (thereby creating a double-team). This method allows the tackle to have a better angle attacking the backside linebacker.


As mentioned, the playside guard will step down and work an A-gap track and wash any shade head-up to shade of the center. The center will always block back on a nose / backside shade / backside 3 tech, aiming high to ensure the defender does not cross his face.

The backside tackle will hinge, by stepping hard inside to prevent backside B-gap penetration, retreat, and look to just get a hand on the shoulder of the backside end.



QB POWER


When you have an exceptional runner at quarterback (like Cam Newton) Power can be run with him as the ball carrier and/or a running back can be substituted as the ‘quarterback’ (ala Wildcat). The QB power is usually complimented with perimeter stressors like speed sweep / reverse.

POWER OPTION



The only nuance of Power Option for the line (everything remains exactly the same), is the technique used by the backside guard. Because the H-back will not be kicking out the end, the guard will have a longer path to work to the backers. To account for this, Malzahn will have the guard use the ‘old-school’ shoulder throw with playside foot pivot as the first step. Opening the hips of the guard for this extended pull track (outside C gap) helps neutralize any penetration and gets the linemen to the destination faster.

The split end will attack the slot receiver’s (who is becoming the pitch man) cover defender and the pitch key will be the flat defender. This is a fantastic play inside the 10 yard line, as most defenses will be in some sort of man coverage.